Microfiber Cleaning for Healthcare Facilities


Uploaded by UniFirstCorp on 09.09.2009

Transcript:
Properly using UniFirst's microfiber infection control system will save time, save money, and
result in cleaner patient rooms.
By following these guidelines you'll be sure to
maximize the cleaning potential of these products
while eliminating cross contamination caused by mopping.
You'll want to start by using the high dusterto clean hard to reach surfaces.
To assemble the high duster
slide a clean micro fiber sleeve over the flexible dusting tool
and secure the velcro closure.
To extend your reach using the adjustable mop handle 0:00:44.070,0:00:48.880 remove the hand gripped by pressing firmly on the two side buttons to release the locking
tabs
and pull the handle straight off.
Next
slide the tool onto the mop handle while pressing the side buttons. 0:00:58.300,0:01:04.690 Release the buttons and make sure the tabs are securely locked onto the mop handle.
Finally, you want to bend the high duster into an "L" shape 0:01:07.950,0:01:11.470 to maximize contact with the surface.
Now simply wipe the high duster along the surfaces that you wish to clean.
The high duster, with microfiber technology
makes cleaning hard to reach surfaces
easy.
Next, you'll cleaned the remaining non-glass surfaces of the room
using our microfiber wipes and mitts.
Each microfiber cloth can be folded to provide eight separate cleaning surfaces.
Start by folding the cloth in half
and then fold the cloth in half again.
Wipe any flat smooth surface with the cloth
and when it becomes soiled
turn the cloth over and continue cleaning.
To access two more clean surfaces
simply unfold and refold the two used surfaces
together.
Finally repeat this
process with the other side of the cloth
by refolding the first fold, folding the dirty
side of the towel against itself.
The micro fiber dusting mitt can also be used
and is handy for odd shaped surfaces.
the micro fibers cloths can be used with chemicals for enhanced cleaning
and you can color code the cloths to eliminate cross-contamination from different surfaces.
The glass microfiber cloths can be used on windows, mirrors, and stainless steel.
Simply wet the towel and wring out any excess water
for sparkling clean, streak-free cleaning of these
surfaces.
Once all the surface cleaning is done you're ready to dry mop the floor and baseboards.

Begin by adjusting the mop handle.
First secure the mop head by
stepping on the base.
Twist the mop handle counterclockwise to release.
Adjust the handle to chin height
and twist the handle clockwise to lock in place. Next
secure a dust mop to the handle by placing a microfiber dust mop on the floor
and pressing the mmop frame against the center of the pad.
The oversized pad allows the dust mop to be used to clean baseboards and corners.
Mop the room from the far edge of the room working back towards the door
using a figure eight pattern and maintaining a consistent
leading edge.
The mop handle is designed to lay flat to enable mopping under furniture
To remove the dust mop
simply stand on the edges of the maop head
and pull straight up on the mob handle.
To avoid excessive
so handling of the dirty mop head
use the velcro on the mop frame to pick up the dirty mop pad.
The final step in cleaning the room his to wet mop the floor.
Begin by pressing the mop frame down on a clean, pre-moistened microfiber mop head in the mop bucket
so that the velcro system fastens.
You will use one clean mop head for each room to eliminate cross-contamination from room
to room.
Drag the mop along the baseboard
to the farthest
corner of the room and work your way back toward the door.
As you mop you'll pick up the moisture left behind to remoisten
the mop as you go.
To avoid cross-contamination
never remoisten a mop head by dunking it back into the mop bucket.
Mop in a figure eight pattern maintaining a consistent 0:04:33.449,0:04:34.479 leading edge
and work your way back to the door
mopping the restrooms last.
To remove the pad
again stand on the edge of the pad and pull the mop handle straight up.
By using the velcro on the mop frame to spear the mop head in the center
you can remove the pad without handling the dirty
side of the mop.
UniFirst microfiber infection control system
allows you to make a clean
start in each and every room with fresh cloths fresh mops and clean water.
Our professionally laundered products are always on hand to help you remove as much bacteria
as possible
in an efficient and cost effective manner.
For more information on UniFirst's microfiber technology contact your local UniFirst
representative.