Android on HTC HD2 (NAND) Tutorial


Uploaded by pinDem0n on 30.03.2011

Transcript:
Welcome to the tutorial... Read the description before you begin!
We'll see now how to install HyperDroidGBX v11
As you can see this is a fully working original Windows Mobile ROM (The Original Stock upgraded to the latest version)
(Yep... Today in Barcelona is partially clouded :)
Now we shutdown the device and enter into the Boot Loader Mode...
Simply press and keep pressed the hangup button (fifth button) on the bottom
Then choose poweroff...
Now you can plug in your USB cable...
Now pay attention...
You have to press and keep pressed the volume DOWN button AND the hangup button (fifth button) on the bottom until it shows the bootloader...
Here we go! - You're now in Boot Loader Mode!
As you can see the installed SPL is version 3.03.0000
We will now install HSPL 2.08 (Required for Android!)
Let's go!
Open the HSPL4 folder and run HSPL4.exe
As you can see is stated that it can be installed over the SPL we currently carry on our device...
Now click "Next"... and wait...
Keep waiting...
Now choose "2.08 HSPL" and click "Next"... and wait...
Oh... LOL... you're phone just died... I'M JOCKIN'!!!! :)
If (and you will) see the "We Hacked It :)" text on your phone you are a few steps from getting all done...
Now you can click "Yes" on the dialog that appeared on your computer and wait for completion... click OK once complete...
Now...
We wait until it boots again in Windows Mobile, and once there we shutdown the device and we check that HSPL 2.08 is correctly installed...
You remember how to switch it off... don't you? ;)
And you also remember how to enter Boot Loader Mode... don't you? ;) (tip: Volume Down AND power button pressed and kept pressed until...)
Back in the Boot Loader Mode we can see that we correctly installed HSPL 2.08...
Thanks Cotulla!!!!!
Now... the only way to quit from this mode is to remove the battery... no need to explain you how...
Mmm... no power without battery...
We put the battery back and we switch it on again...
Now we will install MAGLDR 1.13... we do this running the ROMUpdateUtility located into the MAGLDR113_DAF folder...
When you plug in the USB cable ActiveSync will popup telling you to create a sync profile, or something like that... just cancel the operation...
Simply tick the checkboxes and click "Next"...
Click "Update", then "Next" twice and wait...
Wait...
PUFF! dead again... :) hehehe... wait patiently!
Almost there! ZAP from 0% to 100%!
Now don't panic... You'll see an error (in red) on your device because MAGLDR is not able to launch Windows Mobile... that's OK!
What you are seeing now is MAGLDR... from here we will install (flash) the ClockWorkMod Recovery
Locate DAF.EXE into the Recovery_150M folder/subfolder and run it...
You can read the info text if you wish...
Click "Next"...
Using the volume buttons move to the fifth option (5. USB Flasher) and click the "Home" button... the second on the bottom
TEXT
Once pushed you'll see the "Wait USB..." text... at this point
Click on "Next" and wait...
It will reboot automatically showing again an error (in red)... that's OK!
We're almost done... Now we have to simply flash our beloved HyperDroidGBX!
So, using again the volume buttons we move to the eighth option (8. AD Recovery)...
And we push the Home Button (the second on the bottom)...
Welcome to the CWM Recovery!
In CWM Recovery we use Volume buttons to move, Call button to choose and Back button (the forth button on the bottom) to go back one level...
We choose "install zip from sdcard"...
Now "choose zip from sdcard"...
Now choose "HyperDroid-GBX-v11-signed.zip"... tip: Call button = Enter/OK/Choose! ;)
For security this menu is displayed like this to avoid installations by mistake...
Go over "Yes - Install HyperDroid-GBX-v11-signed.zip" and again... call button to confirm!
Installation in progress!
Now simply push the BACK button once and then choose "reboot system now"! We're DONE!!!
Wait now... your device will reboot and Android will load...
You can safely unplug the USB cable and enjoy HyperDroidGBX!
To change the language just tap "Change Language" button... enjoy!