Valentine's Origami Tutorial: Lovers Ring (Francis Ow)


Uploaded by papierfalten on 30.01.2011

Transcript:
In this video I'm going to show you
how to fold the "Lovers Ring" designed by Francis Ow.
It's an origami ring with a heart in the front.
Folded in this size it looks a bit more elegant.
If you fold a much bigger heart,
then it's more of a fun ring and not as serious.
In this video I'm going to fold a ring
that's about this size.
You have to start with a sheet of paper
that's about 7.5cm (3in) high
and 15 cm (6in) long.
But it's not that important
as long as it's a rectangle.
It's better if the paper is a bit too long, rather than too short.
You may want to know what kind of paper I used
for this ring. It's covered with
golden foil on one side and is red on the other.
For this model I used a 4cm by 12cm (1.5in by 4.75in) sheet of paper.
This paper was a bit shorter,
because the heart doesn't need as much space.
Look at it like this:
Imagine a square
on this side, it will be needed for the heart.
The rest of the paper will be used for the ring.
The ring has to fit around your finger,
so the rest of the paper should wrap around it about 1.5 times.
But let's start folding this sheet.
We'll start with the color side up
to get a ring with a red heart.
Of course, you can choose a different color.
Now fold the paper in half
by aligning the two edges
and making a strong crease.
And unfold.
Then turn like this.
Now take this edge
and fold it to the center to crease a diagonal.
Repeat on the left side.
And open again.
Now turn the paper over
and fold the raw edge to the central crease line,
but don't crease in this area.
So let's start the crease on the right
and only align on the left.
Then crease up until
you meet that diagonal.
This ensures that there won't be any creases
on the heart, that looks a bit nicer.
Now turn the model.
Look, down hier are the creases
- the diagonal creases -
and we can push the paper up along them.
Then squash down. You are creating a new crease here
and over here.
Make strong creases, for example
you can use your thumbnail and draw it along the creases.
Then turn the model over again.
We're going to fold a rabbit ear now.
First take the whole length of the paper
and fold it down.
Crease only in this area.
We don't need a crease in this area.
Now repeat on the bottom half.
Now we've got these two creases
and this long crease.
We'll collapse all three at once.
For this, first collapse the paper back here
and then swing it up like this.
Then fold it to the top to flatten it.
You'll create a new crease here.
Let's turn the model a bit again.
We're going to take a single layer of paper
and align this edge with that edge.
Start the crease on the right again.
We want to crease it all the way,
but a bit of paper is in the way here.
We'll have to make a squash fold there.
Let's first fold as far as we can
and then open this area with your finger.
This was the edge before
and now it's opened up.
The crease line from that edge
will lie exactly on the central line.
This will ensure that in the end
we'll have a nice, symmetrical heart.
We've created the first corner of the heart.
Now we'll take this layer
- it consists of two layers of paper -
and open it. There's a small crease here
and we can fold the layer down along it.
It should happen almost automatically.
While the layer is opened like like
we can swing the whole length over to the other side.
Now the is visible in the bottom.
Now turn the model and - as before -
fold this edge to that line.
On the other side
we again have to open the paper a bit with our finger
to then make a squash fold.
Done.
Now we'll fold
this top layer - can you see it? -
to create a crease line here.
It's going to help us assemble the ring in the end.
Do make this crease extra strong.
Take your thumbnail and draw it along the crease.
Make it really strong.
Then unfold again.
Now fold the lower section to the top.
It should be much easier, because there's a crease there already.
You can make it a bit stronger, though.
Now we'll assemble the ring.
It'll be a bit easier if you first
take a round pen
- nothing edged, please -
and roll the paper around it.
The paper will remember the rounded form a bit.
It'll be easier to get a nice, round ring like this.
You don't need to roll it in very tidily.
Now the paper's a bit curved.
Now notice that
on the right we have an edge
and on the left a small pocket.
We're going to insert the edge
into that pocket. Simply like this.
Now all we have to ensure is
that the ring will have the right size.
You should leave a small gap,
because we'll fold the paper inside
and the ring will get thicker.
That's why I told you the length of the paper,
isn't that important.
We're going to customize the ring now.
But it's good if the paper
overlaps to about halfway.
Else the ring might unfold itself.
So insert the length as far as required.
Let me check whether this is the right size.
It might already be ok.
As you can see there's some space left.
That's about as much space as you should leave.
The good thing about this ring is:
You can unfold it again to change its size.
So if you want to give it away
and you misjudged their ring size,
then you can adjust it right away.
Now I've finished inserting the length.
Now we'll start right by the heart
- look, there are two layers -
and fold the layers down together.
You'll have to press and push a bit.
Then continue all the way around.
Press inside and down. At first it's going to
look a bit messy, but in the end it will look cleaner.
Just press it down all around.
We precreased this line,
so it should get a nice finish.
Once that's done,
let's press extra hard right here
and maybe even crease with your thumbnail
so that it doesn't unfold again.
Let's check the size before we finish the heart.
Seems about right.
Now, let's finish the heart.
Turn over.
There are small, white areas here.
Let's fold those in diagonally.
Once
and twice.
The heart still has these corners,
so let's make a small crease
to give it a nicer shape.
You can add more creases
to make it even rounder.
I think those two are enough.
And then - look -
your nice ring with a heart is done.
And it even fits!
I hope you enjoyed this video.
Now take a sheet of paper and try it out yourself!