Getting Started: Wireless N Network Camera (DCS-930L)


Uploaded by DLinkTV on 07.12.2010

Transcript:
The DCS-930L Wireless N Network Camera by D-Link.
Inside the box you'll find the DCS-930L Wireless N Network Camera,
power adapter and also an ethernet cable.
Included is the manual and software install CD with a quick start guide.
Be sure to keep these handy because we'll be using this while we're installing the DCS-930L.
Some of the features of the DCS-930L are the power LED light, the microphone,
the camera lens, the WPS button, the WPS LED, the reset,
the power receptor and ethernet port.
Ok, let's start the installation process.
Insert the installation disc into your computer. The installation will automatically begin
and follow the prompts until you get to the welcome screen.
Select your language and hit the start button to continue.
The first question, does your router have WPS support?
Many D-Link routers come equipped with WPS support but for this installation
we'll be working with out WPS.
Ensure that "No my router does not have WPS support" is checked and click next.
The mounting hardware has already been connected to the camera so click next to move on.
Connect the included ethernet cable to the router and the other end to the network camera.
Then connect the power adapter to a wall outlet
and then to the back of the camera.
In a few seconds the amber light on the camera will turn green letting you know
the router has successfully connected to the camera.
Back at your computer click next and as long as you saw a green light on your
camera, click "Yes".
After a few seconds the software will discover your camera.
Notice that the connection is currently wired.
In a couple of steps we'll change this to wireless. But for right now click next.
Create a new password for your network camera and confirm your new password
and click next again.
Finally, let's change the connection type for your camera to wireless.
Select I want to connect my camera wirelessly.
After the software scans for wireless signals in your area, select yours
from the drop down.
If you're using wireless security, enter your network key below then select
next to continue.
You will be notified that your camera will reboot. But before clicking continue,
go and unplug the ethernet cable from the back of your camera.
After you have done this, come back and click continue to reboot your camera.
When your camera successfully restarts and you have a green light on the camera again,
you will be prompted to add your new wireless camera to your mydlink account.
If you do not already have one, don't worry, we'll create one now.
Click No, I need to sign up for a new account.
Type your email address, a new password and repeat the password,
enter your first and last name. Lastly click on the box and accept the
terms and conditions. Click next to move on.
You will be sent a verification email to the email account you provided.
Be sure to open the email and click on the activation link to activate your account.
Now click ok.
In just a moment you'll see your camera in action.
Click Finish and you have finished the installation process.
Now you can unplug your wireless camera and move it anywhere next to an outlet.
We're positioning the camera next to the baby's crib to monitor their sleep.
Next, we'll show you how to use your iPhone to view the camera while at home or away.
First you must download the mydlink lite app from the app store.
Once installed open the app and enter the your mydlink account information you just created.
Be sure to click on server and select your country.
You can also choose to stay signed in if you want.
Click log in and select your wireless camera.
In just a moment you'll be able to watch
your camera live from anywhere in the world.