Replacing a Print Cartridge - HP LaserJet Pro M1212nf

Uploaded by HPPrinterSupport on 23.01.2013

This video shows how to replace a cartridge in your HP LaserJet Printer.
To begin, turn the printer on by pressing the Power button.
Next, lift the scanner assembly to gain access to the cartridge door.
Locate the cut-out near the output tray. Place your finger into the cut-out and lift to open
the cartridge door.
Grasp the handle on the print cartridge and pull it straight up and out to remove it and
then set it aside.
Now, take the new cartridge out of its box. To do this, first pull the tab from the side
of the box. Pull the cartridge from the box in its packaging. Tear open the plastic packaging
where indicated. Then remove the cartridge from the plastic.
While holding the new print cartridge by its sides, gently rock the cartridge to distribute
the toner evenly inside.
Remove the protective tape from the new print cartridge.
Touching the shutter or roller can damage the cartridge. It's important to only hold
the new print cartridge by its sides or by the center handle.
Then, grasp the new print cartridge by the center handle and insert it into the printer.
Make sure that the tabs on the cartridge align with the slots in the printer. Then insert
the cartridge until it stops.
Close the print cartridge door.
Then, lower the scanner assembly.
Place the used print cartridge in the bag and box to return it for recycling. For recycling
information go to
The printer is now ready for regular use.
You can find additional helpful videos at and
on our YouTube channel,