Mazda remote keyless entry key DIY programming, keyfob programming


Uploaded by carandtruckremotes on 17.11.2012

Transcript:
Mazda YouTube Transcript
Hello, Welcome to carandtruckremotes.com video channel.
Today I want to show you how to program a keyless remote for a Mazda.
It works pretty much for any Mazda keys that look like that or like this.
It only doesn’t work for Mazda Smart Keys… those are the ones that you have to press
the button to start the ignition. It’s very easy to do, so let’s try it.
So, you have to obtain all of the keys, remove the key from the ignition, close all the doors,
then open the driver’s door, and then you have to turn the key in the ignition on and
off 3 times: 1, 2, 3. You never “start” the car.
You close and open the door 3 times: 1, 2, 3.
*Click *Click: Locks “cycle”: lock and unlock.
Then press Unlock button on each remote twice. *Click *Click (Locks cycle again).
Ok, we just programmed the new remote. Let’s try and see if we can reactivate the
old one that doesn’t work. Ok, the old one is dead, so it is not going to work, but we
got this one to work. If you want to program another remote, well,
this one may not be working, but we managed to program this one here. Let’s see if we
can test the remote and see if it works from the inside of your car.
*Click *Click It Works!
This one unfortunately is dead, so it doesn’t work, but we got the new remote programmed.
So, it’s again, very easy. If you have any questions, please contact us.
Visit is our website: www.carandtruckremotes.com You can send us an email or call us if you
have any questions. Those remotes are available on our website.
Thank you so much. Bye bye.