Hi this is Julie with Beadaholique.com and today I'm going to show you how to use this
Speeder Beader needle and try to say that fast ten times
this is the Speeder Beader needle
and when you get it it's going to come in a package like this and the way you read this is that it's
color coded so the cap is indicative of what size Soft Flex or beading wire
you're going to use with it. So here I have a green cap cap
so this is going to be .019L inches and that's going to be the beading wire
I actually pulled some here that is .019L you just match up
the one here still in the package has a black cap so this goes to
.01L
that's how you read that and order the create size
so if you're familiar with stringing
here i've got a length of beading wire. Again the .019L
I put a little bead stopper on the end
traditionally what you would do to get your beads on is you would take
your beading wire and just put it directly through the hole
and this works perfectly fine but it can be time-consuming and tedious
too if you're doing a really long
necklace or other type of project
So the Speeder Beader needle is great because it has a hollow core to it so
you're going to take
you're beading wire
and you're going to put it in at a forty five degree angle into this little slot right
here
and watch what happens
you push it all the way in. So it's a hollow needle and what that does is it grabs
the beading wire and now you can go ahead and just
use it as a needle to put your beads on. It goes really quick and
easy
It save a lot of time and it's very fun to use as well
It's going to stay in there. It might pull out a little bit, just push it right back in
and as long as you're holding your needle like this or
like this your probably gonna be okay you won't want to drop it
it will come out. So you want to make sure that end of your jewelry
project is on a flat surface so that it takes the weight but if it does pop out
you just go ahead and put it right back in
now the big advantage to this is you know that traditionally if you have a needle
you're going to put it through the eye then it's gonna be doubled
which is going to create quite a bit
more thickness which makes it hard to go through a small hole in a bead
so this is perfect because it just has
that single thickness to it
and it's really easy to use
so that's just a quick demonstration of the Speeder Beader needle
and how easy it is to use and I hope you've enjoyed this quick and easy video
